Kathy, Morgan and I wanted to take a moment to say thanks to you all! We appreciate so much all of you using our products and services this past year. We have been involved in the hunting business for over 12 years now and there could not be a better industry in the world with better customers to be part of.
Over the years, we have met some truly great people, some of our very best friends to this day started out as customers of ours. This business has yet to make us rich in money, but it has made us wealthy in friends!
In today's economy, small business is tough and you have all blessed us by choosing our company and products for your muzzleloading needs. We don't take that lightly and we appreciate it. There are many other great small businesses in the hunting industry that offer great products and services, we hope you will use them as much as you can - they need the same support that you have all given me, my family and my business.
This is the time of year where we should all reach out and help our family, friends, neighbors and even strangers who may not be as blessed as we are. It is also a good time to say extra prayers for the sick, elderly, homeless and for our country's children. Don't forget people who've lost loved ones during the past year.
And also, please take the time to remember and give special thankful thoughts and prayers to our service members and their families. These wonderful, dedicated members of our Armed Forces are truly our modern-day heroes, not the sports or entertainment industry people that everyone seems to worship. I'm sure everyone in the great sport of hunting wish all of our military personnel the very best.
Thanks again for a great year and for trusting us with your hunt!
Kathy, Morgan and I wish you and yours a very, Merry Christmas and the happiest New Year ever!
23 December 2010
Merry Christmas from MAX
Labels:
MAX Messages
19 December 2010
Two Muzzleloading Must-Have Cleaning Products
About six weeks ago, I was buying a few cleaning products needed for a barrel treatment we're going to test this winter. I was shopping on Brownells website, and if you are like me, you have to be careful on a great website like that or your shopping cart will get full quick! On this night, mine did and I spent close to $200 on nothing but cleaning products! Some I needed, some I just wanted to try, and I'm glad I did cause I found a couple I want to tell you about.
For those that have read my articles or seen my videos, you know that CLEAN = ACCURACY & ACCURACY = CLEAN. They both go hand in hand. And these two items fall well within my guidelines. They are of high quality and will provide a better clean than you've ever experienced before. They clean deeper, with less effort, fewer patches and less cleaning solvent.
Have I got you wondering?
The first one I was already familiar with: the Lewis Lead Remover. I'm not sure how long it's been around, but I was using it in the early 80's, cleaning lead out of the barrels of my competition revolvers. Some old timer showed me how to stop fighting caked-on lead by using this tool; now I'm going to return the favor to you. I ran across it that night on the Brownells website and noticed the Lewis Lead Remover came in a .50 cal model and I immediately knew from my past experience with it what it could do for modern in-line muzzleloading cleaning and accuracy.
This tool is best used by us muzzleloaders after a long session on the bench or after every 20 or so shots, if it's a long session like ours are, but certainly after shooting if you intend to store the rifle for awhile. It WILL remove any and all powder, primer or sabot residue from your barrel, safely and quickly. The main part of this tool is rubber jag and is made to screw on a cleaning rod and then brass screens make up the other part of the tool.
To use, just push your ram rod down the barrel from the muzzle. Now place one of the screens over the threads of the tool and screw the tool into the ram rod. Holding the barrel firmly, pull the tool through the barrel.
On a muzzleloader, there is really no reason to repeat the process, everything that didn't belong in the barrel is now trapped in the screen or laying on the bench.

It will help the tool work, and make it easier for you to pull it through the barrel to loosen the crud up with a few wet patches prior to using the tool.
One photo shows the patch before use and the other after being pulled through the barrel. One brass patch has lasted me for 10 cleanings and is still good for more. Each new tool comes with 10 screens.
At this time, we have found nothing on the market that cleans a muzzleloader barrel this well. You can find the .50 Cal Rifle Kit on Brownell's website. It retails for $21.99 (at the time of this publishing) and will last till you loose it. Replacement screens are around $4.00 a pack. The only downside is that to use the tool on a 10-32 rod, you will have to buy an adaptor from 10-32 to 8-32 thread.
The other tool is a cleaning jag that I was not familiar with called the "TCS Muzzleloader Patch Jag". But I'm sure that you can tell how well this jag will work just by looking at it, just like I did. Because of it's design using rubber o-rings, this jag allows the patch to be pushed into the corners of the lands and grooves like no other jag on the market. With this jag, every thickness of patch is a custom fit to your barrel. You never again have to worry about buying a specific brand of patch you like, or that the brand might change the material that the patch is made of. It no longer matters.
I'm not sure if there are replacement o-rings available or how long they last, I just purchased 6 more to have a few on hand. You use this jag like all others, you just use it less and get better results! You can find the .50 Cal Cleaning Jag at Brownells where it retails for $10.95 (again, at the time of this publishing).
As we get closer to the end of the year, we are getting close to the end of our big game seasons. It's time to deep clean our rifles and rid them of all the field use. We have found these two products to be invaluable at our office and we use these type of items a lot. These tools have made such an impact on our testing that I'm certain you will see them both in our upcoming video productions They have both really cut down on my cleaning times and with better results. It would be a great time to add these two tools to your cleaning arsenal.
Our rifles have served us well all year, it's time for us to serve them.
M.A.X. was really started by trying new things, and then passing on what we learn and like to the consumer through our videos. But now, with this blog, we are able to pass on "must have" things now, immediately! And this is one of those times.
For those that have read my articles or seen my videos, you know that CLEAN = ACCURACY & ACCURACY = CLEAN. They both go hand in hand. And these two items fall well within my guidelines. They are of high quality and will provide a better clean than you've ever experienced before. They clean deeper, with less effort, fewer patches and less cleaning solvent.
Have I got you wondering?
The first one I was already familiar with: the Lewis Lead Remover. I'm not sure how long it's been around, but I was using it in the early 80's, cleaning lead out of the barrels of my competition revolvers. Some old timer showed me how to stop fighting caked-on lead by using this tool; now I'm going to return the favor to you. I ran across it that night on the Brownells website and noticed the Lewis Lead Remover came in a .50 cal model and I immediately knew from my past experience with it what it could do for modern in-line muzzleloading cleaning and accuracy.
This tool is best used by us muzzleloaders after a long session on the bench or after every 20 or so shots, if it's a long session like ours are, but certainly after shooting if you intend to store the rifle for awhile. It WILL remove any and all powder, primer or sabot residue from your barrel, safely and quickly. The main part of this tool is rubber jag and is made to screw on a cleaning rod and then brass screens make up the other part of the tool.
On a muzzleloader, there is really no reason to repeat the process, everything that didn't belong in the barrel is now trapped in the screen or laying on the bench.
It will help the tool work, and make it easier for you to pull it through the barrel to loosen the crud up with a few wet patches prior to using the tool.
One photo shows the patch before use and the other after being pulled through the barrel. One brass patch has lasted me for 10 cleanings and is still good for more. Each new tool comes with 10 screens.
At this time, we have found nothing on the market that cleans a muzzleloader barrel this well. You can find the .50 Cal Rifle Kit on Brownell's website. It retails for $21.99 (at the time of this publishing) and will last till you loose it. Replacement screens are around $4.00 a pack. The only downside is that to use the tool on a 10-32 rod, you will have to buy an adaptor from 10-32 to 8-32 thread.
The other tool is a cleaning jag that I was not familiar with called the "TCS Muzzleloader Patch Jag". But I'm sure that you can tell how well this jag will work just by looking at it, just like I did. Because of it's design using rubber o-rings, this jag allows the patch to be pushed into the corners of the lands and grooves like no other jag on the market. With this jag, every thickness of patch is a custom fit to your barrel. You never again have to worry about buying a specific brand of patch you like, or that the brand might change the material that the patch is made of. It no longer matters.
I'm not sure if there are replacement o-rings available or how long they last, I just purchased 6 more to have a few on hand. You use this jag like all others, you just use it less and get better results! You can find the .50 Cal Cleaning Jag at Brownells where it retails for $10.95 (again, at the time of this publishing).
As we get closer to the end of the year, we are getting close to the end of our big game seasons. It's time to deep clean our rifles and rid them of all the field use. We have found these two products to be invaluable at our office and we use these type of items a lot. These tools have made such an impact on our testing that I'm certain you will see them both in our upcoming video productions They have both really cut down on my cleaning times and with better results. It would be a great time to add these two tools to your cleaning arsenal.
Our rifles have served us well all year, it's time for us to serve them.
Labels:
Brownells,
clean=accuracy,
muzzleloading tips
01 December 2010
TC Omega DVD: MAX Q&A
MAX Q&A: your questions from email and facebook
There are some good questions out there.
Some are from folks who are new to muzzleloading and some are from guys who've been doing this a while, but sharing information is what I'm all about, so I'm posting the questions I get, along with my answers.
-------- Original Message --------
Subject: Question for You
Hi,
I own a T/C Omega Z5 (and 2 jars of Blackhorn 209) and I see that you have 2 DVDs out. Do your 2 DVDs have different info in them (other than featuring different rifles), would I be missing out on some information if I bought the "Maximize Your Muzzleloader #2: Precision Fire Inlines" but not your first DVD? I'm new to muzzleloaders but not center fire rifles, bows and handguns.
Thanks!
Larry
Subject: RE: Question for You
Larry,
It does sound like my second video, PFI would be more what you are looking for.
DVD #1, "Maximize Your Muzzleloader for Pin Point Accuracy" is an excellent choice to learn techniques for cleaning, both at the bench and my storage regiment, along with loading for accuracy. It also includes plenty of marksmanship information. This video will work for both beginners and shooters who’ve been around awhile as it is full of great tips and techniques I have picked up over my extensive shooting career. I believe this to be the most comprehensive and informative video EVER produced on how to accurize, load and clean any modern in-line muzzleloader. Although the video was shot using a Thompson Center Encore, anyone can use these tips and techniques on any brand of muzzleloader.
DVD #2, “Precision Fire Inlines” also covers accuracy, cleaning and marksmanship. But it goes much deeper into the specific components of a load. Some of the highlights include:
* Ballistic gel penetration & expansion and accuracy tests on some of the best bullets in the world.
* The most complete primer / ignition test ever put on video, this alone will explain why groups are not as tight as they should be.
* Proper cleaning and loading for maximum accuracy.
* All data and results accomplished with a factory, off-the-shelf TC Omega Rifle.
* 8 complete loads that will get anyone started on the path to better accuracy.
* Proper scope mounting, bore sighting and marksmanship tips in the Special Features Section.
Both videos are over 2 hours long and full of great info and insights! I hope this information helps and appreciate the opportunity to be part of your muzzleloader experience!
- Russell
If you've got any good questions, email me at sales@maxmuzzleloader.com or send them to me by posting on the wall of the MAX Facebook page. I'll keep everyone's last name out of it, but if you include what state you are in I'll add that info.
Labels:
MAX products,
MAX QandA,
thompson center
Subscribe to:
Posts (Atom)


